combined equipment with vane pack/multi-cyclone bundle and cartridge bundle:
羽叶/多因子旋流子—滤芯式多效多级组合器
in actual projects, experienced engineers have combined one more different style of internals function units and designed the combined equipment in order not only to meet the super fine treatment process requirement but also extend the consumables circle life more than double time to save the costs of operating and maintenance.
在实际项目中，经验丰富的工程师把两种以上不同型式和功能单元的内件设计组合在一起，以获得既满足超级精密处理过程技术要求，又能达到延长两倍以上内件使用寿命周期、节约运行维护成本目的。
for example, the feather vane type bundle would be selected as the first stage to remove most part of the liquid mists in the flow and then coalescing cartridge bundle would be selected as the second stage to coalesce the micro mists to grow into bigger mist to remove, and probably the feather vane type bundle would be again added as the third stage to remove the rest part of bigger mists coalesced by cartridge coalesce. another example, the g54 multi-cyclone type bundle would be selected as the first stage to remove most part of the solid particles and liquid mists in the flow and then filtration cartridge bundle would be selected as the second stage to filtrate the very small part of micro particles.
例如，将羽叶式分离内件组设计为第一级舱以脱除气流中绝大部分液沫，再把聚结滤芯内件组作为第二级舱聚结更微小的液沫使其长大而加以脱除。并且，羽叶式分离内件组还可能作为第三级舱对逃逸出聚结滤芯二级舱的大液滴进行补充捕集。另一实例，g54型多因子旋流子内件组设计为第一级舱以脱除气流中绝大部分固体颗粒物和液沫，而把过滤滤芯内件组作为第二级舱过滤脱除更微小的固体颗粒物。
of course, though the first stage bundle of multi-cyclone has removed most part of the particles in the gas to double the circle life of the filter cartridges, the filter cartridge elements have still been blocked by the rest small amount of particles in future and very difficult to recovery them, and the blocked cartridge element have to be changed and maintained during the overhaul. if without considering the equipment stand-by, the engineers have to use the engineering skills to avoid the blocked elements’ breaking down the production lines.
当然，尽管多因子旋流子内件组作为第一级舱已经脱除气流中含有的绝大部分固体颗粒物，但过滤滤芯内件组将来仍会被气流中残存的极少量固体颗粒物逐渐堵塞而很难再生。堵塞后的滤芯必须在大修期间维护更换成新的滤芯。如果不考虑设置备机，工程师必须充分利用自己的工程经验进行前述组合设计，以避免滤芯被堵塞而导致生产线“梗阻停车”。